As is popular with numerous other items, the naming convention for reflective tape seems to possess a bit of a advertising spin to it which can make it confusing for buyers. Particularly, unless you are acquainted with the product, the designation engineer grade reflective tape could not seem to become particularly informative concerning the top quality of the product. Fundamentally, what you need to know about engineer grade reflective tape is that it is by far the most reasonably priced variation among the high quality reflective tapes.
Engineer grade reflective tape is created with enclosed glass beads. These glass spheres reflect light back at its source no matter the angle of strategy due the the geometry with the sphere shaped objects. As a way to be classified as engineer grade tape, the tape must meet the standards specified in ASTM D4956 form I, which was developed by the American Society for Testing and Materials. ASTM develops internationally recognized standards for good quality and safety.
This safety enhancing product is accessible within a selection of thicknesses, widths, and lengths. For common objective use, a 5 mil thick engineer grade reflective tape is advised by Koffler Sales. It is available in widths from 1? by means of four? and in 30' and 150' roll lengths.
Engineer grade reflective tape is usually suitable for applications that do not require DOT compliance (Department of Transportation). For reference, the following forms of reflective tape which give higher levels of retroreflectivity than engineer grade tape are also readily available from Koffler Sales. These larger grades of Reflective tape are most usually utilized in transportation applications.
* SUPERBRITE SOLID REFLECTIVE - Meets or exceeds ASTM D-4956-99 Type III. * NEONBRITE SOLID REFLECTIVE - Meets or exceeds ASTM D-4956 Type VIII. * CONSPICUITY DOT-C2 - exceeds NHTSA (49 CFR 57) and carries the DOT - C2 legal certification for compliance.
Engineer grade reflective tape is created with enclosed glass beads. These glass spheres reflect light back at its source no matter the angle of strategy due the the geometry with the sphere shaped objects. As a way to be classified as engineer grade tape, the tape must meet the standards specified in ASTM D4956 form I, which was developed by the American Society for Testing and Materials. ASTM develops internationally recognized standards for good quality and safety.
This safety enhancing product is accessible within a selection of thicknesses, widths, and lengths. For common objective use, a 5 mil thick engineer grade reflective tape is advised by Koffler Sales. It is available in widths from 1? by means of four? and in 30' and 150' roll lengths.
Engineer grade reflective tape is usually suitable for applications that do not require DOT compliance (Department of Transportation). For reference, the following forms of reflective tape which give higher levels of retroreflectivity than engineer grade tape are also readily available from Koffler Sales. These larger grades of Reflective tape are most usually utilized in transportation applications.
* SUPERBRITE SOLID REFLECTIVE - Meets or exceeds ASTM D-4956-99 Type III. * NEONBRITE SOLID REFLECTIVE - Meets or exceeds ASTM D-4956 Type VIII. * CONSPICUITY DOT-C2 - exceeds NHTSA (49 CFR 57) and carries the DOT - C2 legal certification for compliance.
About the Author:
Randy Leonard is an engineer/construction building manager who also blogs in his spare time. Learn more about what Randy has to say about reflective tape.
Comments :
0 comments to “Reflective Tape”
Post a Comment