A split system air conditioner simply implies that the condenser is separated from indoor unit. There is at least one unit that sits in the room and a compressor on the outside at a convenient place either on the ground or hung to the walls in a group. Each model comes with unique features as some have multiple indoor units and a single compressor.
The air conditioners are designed differently and come in a number of sizes. In order to chose the right size one must consider some vital factors like the size of the room and the total number of inside units required. The air conditions of a single room are comfortably regulated by one unit.
The condenser is connected to the indoor unit with the help of copper pipes or electrical wires which are fitted by experienced technicians. Refrigerant gas is then pushed to the indoor units from the condenser coil but it must be passed through a compressor to increase its pressure. Cold air is quietly distributed by a fan across the evaporator coils.
Split air conditioning systems control the amount of cold air flowing into a room through thermostats or infra red remotes. Each room is designed to maintain a certain temperature depending on its use. This technique is greatly employed in residential house as the sitting room can be conditioned during the day and the bedroom at night.
It is used to regulate the temperature levels in large structures like supermarkets and retail stores since they can be too hot or cold. It can also be used to condition the living room throughout the daytime and the bedroom at night. Due to space demands on recent buildings, modular and exceptional purpose offices may be necessary to installed.
The condensers can be placed on the outside away from offices and wires or connection pipes be run inside the house. This method of temperature regulation is cost effective as air is distributed with precision. The systems can also be installed in several building since no duct work and distribution techniques are required.
In split system air conditioner, the condenser can even be positioned outside the office and connection pipes be run to the room. Air is distributed in the room through then ceiling units or pipes which are fitted on the walls. This technique does not require much duct work or distribution knowledge and because of this it can be installed in a number of areas.
The air conditioners are designed differently and come in a number of sizes. In order to chose the right size one must consider some vital factors like the size of the room and the total number of inside units required. The air conditions of a single room are comfortably regulated by one unit.
The condenser is connected to the indoor unit with the help of copper pipes or electrical wires which are fitted by experienced technicians. Refrigerant gas is then pushed to the indoor units from the condenser coil but it must be passed through a compressor to increase its pressure. Cold air is quietly distributed by a fan across the evaporator coils.
Split air conditioning systems control the amount of cold air flowing into a room through thermostats or infra red remotes. Each room is designed to maintain a certain temperature depending on its use. This technique is greatly employed in residential house as the sitting room can be conditioned during the day and the bedroom at night.
It is used to regulate the temperature levels in large structures like supermarkets and retail stores since they can be too hot or cold. It can also be used to condition the living room throughout the daytime and the bedroom at night. Due to space demands on recent buildings, modular and exceptional purpose offices may be necessary to installed.
The condensers can be placed on the outside away from offices and wires or connection pipes be run inside the house. This method of temperature regulation is cost effective as air is distributed with precision. The systems can also be installed in several building since no duct work and distribution techniques are required.
In split system air conditioner, the condenser can even be positioned outside the office and connection pipes be run to the room. Air is distributed in the room through then ceiling units or pipes which are fitted on the walls. This technique does not require much duct work or distribution knowledge and because of this it can be installed in a number of areas.
About the Author:
Frost Air Conditioning Sydney supply and install split system air conditioners since 1971 so click here for the latest a/c systems and installation specials.
Comments :
0 comments to “Features Of A Split System Air Conditioner”
Post a Comment