One of the popular trends in eye wear these days are known as the clip on flip up sunglasses because these things can actually replace actual sunglasses with the same quality. Now one many do not know is that it is actually possible to make this kind of accessory instead of going out to a store and buying one. Now if one is interested in trying to create one of these things, then try following some of these steps.
Now the very first thing to do would be to get a pair of old and cheap sunglasses and start taking the arms out with a screwdriver. By doing this, he will be left with just the two lenses of the pair of glasses. Make sure to be very careful with this part because the glasses will become quite fragile.
The next step is to grab hold of a paper clip that is quite hard so that the clip will be steady. After this, one should now get some pliers and make it very straight. Always do this very slowly because it is quite possible that the wire will break if handled too fast.
After making the wire straight, take a pair of scissors and cut the wire in the middle until it becomes two. From there, one must now place one wire into the hole at the sides of the glasses. After that, he should take the other piece of wire and do the exact same thing.
When all of the wires have been slotted into the holes, then the following step to do would be to attach the wires to the holes. In order to do this, one has to use the pliers to bend the wire so that it will be attached to the hole. Make sure to tie it in very tight otherwise the wire will just fall out later on when it is attached to the eyeglasses.
The next thing to do would be to take the two ends of the wiring and try to tie them together in the middle. Take note that the wire has to be attached to the frame of the glasses so that it cannot be seen. When the two ends have been brought to the middle, then try to tie them together.
When a small knot has already been formed, then the next part would be to curve the wire a little bit. This little curve will be the one that will be attached to the very center of the glasses. When everything fits well, then it may now be worn outside.
So basically, that is an easy way on how to make clip on flip up sunglasses. The great thing about making this at home is that it is cheaper than buying one outside. Also, it is more practical than an actual pair of sunglasses because it is smaller and it will not get spoiled easily.
Now the very first thing to do would be to get a pair of old and cheap sunglasses and start taking the arms out with a screwdriver. By doing this, he will be left with just the two lenses of the pair of glasses. Make sure to be very careful with this part because the glasses will become quite fragile.
The next step is to grab hold of a paper clip that is quite hard so that the clip will be steady. After this, one should now get some pliers and make it very straight. Always do this very slowly because it is quite possible that the wire will break if handled too fast.
After making the wire straight, take a pair of scissors and cut the wire in the middle until it becomes two. From there, one must now place one wire into the hole at the sides of the glasses. After that, he should take the other piece of wire and do the exact same thing.
When all of the wires have been slotted into the holes, then the following step to do would be to attach the wires to the holes. In order to do this, one has to use the pliers to bend the wire so that it will be attached to the hole. Make sure to tie it in very tight otherwise the wire will just fall out later on when it is attached to the eyeglasses.
The next thing to do would be to take the two ends of the wiring and try to tie them together in the middle. Take note that the wire has to be attached to the frame of the glasses so that it cannot be seen. When the two ends have been brought to the middle, then try to tie them together.
When a small knot has already been formed, then the next part would be to curve the wire a little bit. This little curve will be the one that will be attached to the very center of the glasses. When everything fits well, then it may now be worn outside.
So basically, that is an easy way on how to make clip on flip up sunglasses. The great thing about making this at home is that it is cheaper than buying one outside. Also, it is more practical than an actual pair of sunglasses because it is smaller and it will not get spoiled easily.
About the Author:
Check out www.brimzsports.com for a review of the benefits of purchasing clip on flip up sunglasses online, today. You can also view our selection of sunglasses at http://www.brimzsports.com now.
Comments :
0 comments to “Clip On Flip Up Sunglasses”
Post a Comment