Pool tables can develop worn spots and rips in the surface if not treated carefully. This will throw a game off for most people and charges of fixing the game in favor of you can be brought by even the friendliest competitors. The nature of the covering, which is felt, will have a lot to do with how the table is used, so a rip or worn area must be repaired or replaced. This pool table refelting is best done by a company who does this all of the time.
You could patch that rip with a bit of felt or redo the entire surface. Patching a rip can take a few minutes of careful preparation and you can be back at your game of eight ball. You must ensure that the patch does not interfere with the delicate roll of each ball as it passes over this area. This can be accomplished with a small piece of felt, some adhesive, a very sharp knife and a lot of patience.
Regardless of whether it is a rip or the table is just a bit worn or faded, a complete recovering may be appropriate. There are many such companies who specialize in this work in the Denver, CO area. They will help you discover all of the items that are needed and give you some valuable insights into such things as the proper side of the felt to use.
You will find that a professional will be the better choice for this project. They have been doing this for years and have the experience to get it right, the first time. They will ask you what color of felt you would like and this opens a lot of possibilities for you and the room in which it is placed.
The vast majority of pool tables come in a standard green felt. This is fine if you are looking for standard, however, the ability to get other colors might interest you. Some of these others will be purple, blue, red, cream and those with designs on them. Sprucing up your party room can begin with the largest game there.
The professionals will arrive and get right to work. The measurements will be taken to make sure they have adequate felt of the proper color. The rails will need to be removed to reveal the old staples, which will have to be removed as well. The old glue must come off and the surface prepped to receive the new adhesive.
That felt piece will be cut to the proper width and length. This will extend past the edge of the slate or bed and allow the staples to hold it onto the surface. A very thin, solid layer of adhesive is applied and the felt is laid over the surface. This is stretched in all dimensions to ensure it is perfectly flat and the staples are applied under the rail location.
The rails are taken apart, very carefully, and covered as well. They are reinstalled and weights are placed on the entire table to ensure a good fir and curing. This should stand, by itself, for about 24 hours as it cures properly. The company will make sure you are satisfied and stop by to deal with any issues. They might also ask you for a game to try it out.
You could patch that rip with a bit of felt or redo the entire surface. Patching a rip can take a few minutes of careful preparation and you can be back at your game of eight ball. You must ensure that the patch does not interfere with the delicate roll of each ball as it passes over this area. This can be accomplished with a small piece of felt, some adhesive, a very sharp knife and a lot of patience.
Regardless of whether it is a rip or the table is just a bit worn or faded, a complete recovering may be appropriate. There are many such companies who specialize in this work in the Denver, CO area. They will help you discover all of the items that are needed and give you some valuable insights into such things as the proper side of the felt to use.
You will find that a professional will be the better choice for this project. They have been doing this for years and have the experience to get it right, the first time. They will ask you what color of felt you would like and this opens a lot of possibilities for you and the room in which it is placed.
The vast majority of pool tables come in a standard green felt. This is fine if you are looking for standard, however, the ability to get other colors might interest you. Some of these others will be purple, blue, red, cream and those with designs on them. Sprucing up your party room can begin with the largest game there.
The professionals will arrive and get right to work. The measurements will be taken to make sure they have adequate felt of the proper color. The rails will need to be removed to reveal the old staples, which will have to be removed as well. The old glue must come off and the surface prepped to receive the new adhesive.
That felt piece will be cut to the proper width and length. This will extend past the edge of the slate or bed and allow the staples to hold it onto the surface. A very thin, solid layer of adhesive is applied and the felt is laid over the surface. This is stretched in all dimensions to ensure it is perfectly flat and the staples are applied under the rail location.
The rails are taken apart, very carefully, and covered as well. They are reinstalled and weights are placed on the entire table to ensure a good fir and curing. This should stand, by itself, for about 24 hours as it cures properly. The company will make sure you are satisfied and stop by to deal with any issues. They might also ask you for a game to try it out.
Comments :
0 comments to “Get Your Pool Table Refelting Done By Someone Who Has Done It Before”
Post a Comment